SunGuard® High Performance

Aquamarine 40

Solar protection and low-E glass in one solution

SunGuard® HP Aquamarine 40 is a high-performance product that has solar and low-E properties. This means great thermal insulation in a sophisticated green colour that will make any project shine.

Request Aquamarine 40 Sample

Product Downloads:

SunGuard® Brochure BUILDING INFORMATION MODELING (BIM

Ic-004

Can be laminated

Available on laminated and acoustic laminated glass for more security and comfort

Single product

For both annealed and heat treatment

IC-052

Easy to process

Specs and Downloads

Thickness

  • 3 - 12 mm

Available Sizes

  • Maximum Height x Width: 2440 mm x 3660 mm

Recommended coating positions

  • Double glazed: 2

Application type

  • Can be used in: Insulating Glass Unit

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics™ tools to explore even more options for colour and performance.

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics™ tools to explore even more options for colour and performance.

* Please see Colour Disclaimer at the bottom of the page for additional information.

Performance Data

  • TRANSMITTANCE

    1. Visible Light 34
    2. Ultraviolet 12
    3. Solar Energy 16
    4. Light to Solar Gain (LSG) 1.5
  • Reflectance

    1. Visible Light Outside 20
    2. Visible Light Inside 23
    3. Solar Energy Outside 11
  • U-VALUE

    1. Summer Day (W/m²·K) 1.7
  • Heat Gain

    1. Relative Heat Gain (RHG) 172
    2. Solar Heat Gain Coefficient (SHGC) 0.22
  • Composition

    1. Composition 6 mm / 12 mm / 6 mm - coating on surface #2
    2. Glass 1 & Coating SunGuard® HP Aquamarine 40 on Green
    3. Glass 2 & Coating Clear
    4. Gap 1 100% Air
    5. Calculation Standard NFRC 2010

Displayed colours are intended to represent actual colour. Colour is a function of light and reflectivity and cannot be accurately portrayed online. Actual glass samples should be used to determine colour. Please order a sample and discuss colour with your Gujarat Guardian Representative to ensure you are pleased with your SunGuard® selection before ordering glass for your project.

The thermal stress guideline is only a rough guide to the thermal safety of a glazing. Other factors such as large glass areas, shapes and patterns, thick glass, glass damaged during shipping, handling or installation, orientation of the building, exterior shading, overhangs/fins that reduce wind speed, and areas with high daily temperature fluctuations can all increase the probability of thermal breakage. The results shown are not for any specific glazing installation and do not constitute a warranty against glass breakage.