SunGuard® High Performance

HP Aquamarine 40

Solar protection and low-E glass in one solution

SunGuard® High Performance (HP) Aquamarine 40 is a is a high performance product that has solar and low-e properties. This means great thermal insulation in a sophisticated silver colour that will make any project shine.

Ic-004

Can be laminated

Available on laminated and acoustic laminated glass for more security and comfort

Single product

For both annealed and heat treatment

IC-052

Easy to process

Specs and Downloads

Thickness

  • 3 - 12 mm

Applications

  • Facades
  • Windows
  • Doors
  • Curtain Walls
  • Roofs
  • Skylights

Manufacturing Options

  • Tempered
  • Laminated
  • Heat Soaked
  • Heat Strengthened

Available Sizes

  • Maximum Height x Width: 3210 x 6000 mm

Recommended coating positions

  • Double glazed: 2

Edge Deletion

  • Required: No

Application type

  • Can be used in: Insulating Glass Unit

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics tools to explore even more options for color and performance.

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics tools to explore even more options for color and performance.

* Please see Colour Disclaimer at the bottom of the page for additional information.

Performance Data

  • TRANSMITTANCE

    1. Visible Light 33
    2. Ultraviolet 8
    3. Solar Energy 15
    4. Light to Solar Gain (LSG) 1.46
  • Reflectance

    1. Visible Light Outside 20
    2. Visible Light Inside 23
    3. Solar Energy Outside 14
  • U-VALUE

    1. Summer Daytime - Air (Btu/hr·ft²·F) 0.30
  • Heat Gain

    1. Relative Heat Gain (RHG) 55
    2. Solar Heat Gain Coefficient (SHGC) 0.22
  • Composition

    1. Composition 6 mm / 12 mm / 6 mm - coating on surface #2
    2. Glass 1 & Coating SunGuard HP Aquamarine 40 on Green
    3. Glass 2 & Coating Clear
    4. Gap 1 100% Air
    5. Calculation Standard NFRC 2010

Displayed colors are intended to represent actual color. Color is a function of light and reflectivity and cannot be accurately portrayed online. Actual glass samples should be used to determine color. Please order a sample and discuss color with your Guardian Architectural Design Manager to ensure you are pleased with your SunGuard selection before ordering glass for your project.

The thermal stress guideline is only a rough guide to the thermal safety of a glazing. Other factors such as large glass areas, shapes and patterns, thick glass, glass damaged during shipping, handling or installation, orientation of the building, exterior shading, overhangs/fins that reduce wind speed, and areas with high daily temperature fluctuations can all increase the probability of thermal breakage. The results shown are not for any specific glazing installation and do not constitute a warranty against glass breakage.