ClimaGuard® Residential Glass

ClimaGuard HP Neutral 70

Mother brings a dish of meal at table to her hungry family.

Durability and efficiency for doors and specialty applications

ClimaGuard® HP Neutral 70 represents a new standard in durable high performance low-E glass. Designed for use in light commercial and residential applications, Neutral 70 provides the optical clarity and energy performance traditionally associated with sputter coatings.

Stands up to wear-and-tear

Mechanical and chemical durability through zirconia coating

Extended shelf life

Easy to fabricate

Widely available

Easy to order with other ClimaGuard coatings

Product Information

Thickness

  • 3 - 12 mm

Applications

  • Facades
  • Windows
  • Doors
  • Curtain Walls
  • Roofs
  • Skylights

Manufacturing Options

  • Tempered
  • Laminated
  • Heat Soaked
  • Heat Strengthened

Available Sizes

  • Maximum Height x Width: 3210 x 6000 mm

Recommended coating positions

  • Laminated: 2
  • Double glazed: 2

Edge Deletion

  • Required: Yes

Application type

  • Can be used in: Insulating Glass Unit, Laminated

Performance Data

  • TRANSMITTANCE

    1. Visible Light 67
    2. Ultraviolet 44
    3. Solar Energy 46
    4. Light to Solar Gain (LSG) 1.25
  • Reflectance

    1. Visible Light Outside 12
    2. Visible Light Inside 12
    3. Solar Energy Outside 16
  • U-VALUE

    1. Summer Daytime - Air (Btu/hr·ft²·F) 0.34
  • Heat Gain

    1. Relative Heat Gain (RHG) 128
    2. Solar Heat Gain Coefficient (SHGC) 0.54
  • Composition

    1. Composition 6 mm / 12 mm / 6 mm - coating on surface #2
    2. Glass 1 & Coating ClimaGuard HP Neutral 70 on Clear
    3. Glass 2 & Coating Clear
    4. Gap 1 100% Air
    5. Calculation Standard NFRC 2010
  • TRANSMITTANCE

    1. Visible Light 72
    2. Ultraviolet 1
    3. Solar Energy 52
    4. Light to Solar Gain (LSG) 1.18
  • Reflectance

    1. Visible Light Outside 9
    2. Visible Light Inside 9
    3. Solar Energy Outside 18
  • U-VALUE

    1. Summer Daytime - Air (Btu/hr·ft²·F) 0.92
  • Heat Gain

    1. Relative Heat Gain (RHG) 153
    2. Solar Heat Gain Coefficient (SHGC) 0.61
  • Composition

    1. Composition 3mm + Saflex 0.38 + 3mm - coating on surface #2
    2. Glass 1 & Coating ClimaGuard HP Neutral 70 on Clear
    3. Glass 2 & Coating Clear
    4. Calculation Standard NFRC 2010

Displayed colors are intended to represent actual color. Color is a function of light and reflectivity and cannot be accurately portrayed online. Actual glass samples should be used to determine color. Please order a sample and discuss color with your Guardian Architectural Design Manager to ensure you are pleased with your SunGuard selection before ordering glass for your project.

The thermal stress guideline is only a rough guide to the thermal safety of a glazing. Other factors such as large glass areas, shapes and patterns, thick glass, glass damaged during shipping, handling or installation, orientation of the building, exterior shading, overhangs/fins that reduce wind speed, and areas with high daily temperature fluctuations can all increase the probability of thermal breakage. The results shown are not for any specific glazing installation and do not constitute a warranty against glass breakage.