SunGuard® High Performance

Titan 70/54

SunGuard® High Performance (HP) Titan 70/54 is an all-purpose glass that combines energy efficiency, neutral appearance and is easy to process. HP Titan 70/54 helps to reduce heating costs during the winter month through enhanced thermal insulation while offering a high level of light transmission.

Thermal insulation

Reduce energy cost by keeping heat inside the building

Transparent

71% light transmission means clear, neutral glass

Single product

For both annealed and heat treatment

Can be heat-treated

Through nationwide network of Guardian fabricators

Product Information

Glass Substrates

  • ExtraClear

Thickness

  • 4 - 12 mm

Applications

  • Facades
  • Windows
  • Doors
  • Curtain Walls
  • Roofs
  • Skylights

Manufacturing Options

  • Tempered
  • Laminated
  • Heat Soaked
  • Heat Strengthened
  • Annealed

Available Sizes

  • Maximum Height x Width: 3210 x 6000 mm

Recommended coating positions

  • Double glazed: 2

Edge Deletion

  • Required: No

Application type

  • Can be used in: Insulating Glass Unit

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics tools to explore even more options for colour and performance.

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics tools to explore even more options for colour and performance.

* Please see Colour Disclaimer at the bottom of the page for additional information.

Performance Data

  • Visible Light

    1. Transmittance [%] 70
    2. Reflectance outside [%] 12
    3. Reflectance inside [%] 11
  • Solar Energy

    1. Solar Factor (g) [%] 54.01
    2. Direct transmission[%] 50
    3. Reflectance outside [%] 19
    4. Absorption [%] 30
    5. UV [%] 45
  • Thermal Properties

    1. U-Value ∆T=15°K [W/m²·K] 1.39
    2. R-Value ∆T=45°K 2 m/s wind [m²·K/W] 0.59
  • Composition

    1. Composition 6 mm SG / 16 mm / 4 mm - coating on surface #2
    2. Glass 1 & Coating SunGuard HP Titan 70/54 on Guardian ExtraClear
    3. Glass 2 & Coating Guardian ExtraClear
    4. Gap 1 10% Air, 90% Argon
    5. Calculation Standard GOST EN 410-2014

Performance Values

This is a schematic picture of how coating works. It helps to keep the heat indoors, reflects solar radiation, and transmits visible daylight. The values of the above-mentioned characteristics are nominal for the central part of an IGU of the configuration, listed above. The values do not take into consideration the window section profile system or the material of the frames. Heat resistance value is representing only the central part of IGU (Rcenter) and given for Moscow climate region (outside air temperature -25 °C, inside air temperature +20 °C). Deviations are possible due to manufacturing and design tolerances. Calculations, terms and conditions are based on GOST national standard EN 410-2014 and GOST EN 673-2016. The calculations have been acquired with the help of software complex, Guardian online configurator.

Color

Displayed colors are intended to represent actual color. Color is a function of light and reflectivity and cannot be accurately portrayed online. Actual glass samples should be used to determine color. Please order a sample and discuss color with your Guardian Architectural Design Manager to ensure you are pleased with your SunGuard selection before ordering glass for your project.